OPERATION
OPERATING THE MAIN UNIT | OPERATING THE CA KP.2 KEYPAD |
•Power switch: When the power switch is engaged, the CA power indicator will be lit an amber color. The CA should be left on at all times. The unit will consume very little power unless the zones are on and active. The unit has a
•Zone Indicators: The zone indicator will light either red for off or green for on. The zones can only be turned on from the keypads. All functions are accessed through the keypad only.
1)Power On / Off: This knob on the CA KP.2 keypad con- trols all functions except for the IR management. To turn the unit on, simply turn the control knob clockwise. You will feel and hear a click verifying that the unit has been activated. The lights on the keypad will also illuminate to verify the zone is now on. Note - The CA front panel
2)Volume Up / Down: Once the unit is on, the knob can be used to adjust the volume. To adjust the volume up, turn the knob clockwise, and to turn the volume down, turn
3)Source Selection: By pressing the knob, the zone will scroll through the four sources connected to the CA. The keypad has four backlit windows that indicate the source selected.
4)IR Source Control: The IR window repeats all source com- mands from the source component's remote (or optional DSC/DAN keypads) through the CA and 845.1 emitters. Most IR remotes have a range of 20' at an angle of
Figure 17 -
ROCK R&B
JAZZ CHILDRENS
•ON / OFF
•VOLUME
• SOURCE
REMOTE SENSOR
1-Power On / Off
3-Source Selection
12
