Wiring Instructions
CONNECTING VIDEO MONITORS
Each PR-4Zi zone has a composite video output to allow viewing video from any of six A/V sources. Connect monitors as shown in Figure 5 using RG6U cable with RCA type connectors. If more than two monitors are being used in a zone, a composite video distribution amplifier is recommended. The PR- 4Zi video outputs are buffered and are good for up to 100’ of RG6U.
Figure 5 – Video Output connections
Figure 6 – Source Loop outputs
SOURCE LOOP OUTPUTS
The PR-4Zi has six buffered, fixed-level audio/video outputs (Figure 6). When set to SOURCE LOOP OUT, these output sig- nals from the corresponding input source. This source loop configuration allows the PR-4Zi to pass source signals to another component, such as a home theater con- troller, or to another PR-4Zi for sharing sources in a multiple controller system.
