ST2-XM OPERATION

UNO-LRC1 REMOTE CONTROL WITH CAV6.6

UNO-LRC1 Remote Control Operation

Turning the unit on

The tuner is power managed by the CAV6.6 or other RNET-enabled controller. If the tuner is in standby mode, any button press of the UNO-LRC1 will bring the tuner out of standby mode when used with the UNO keypad.

Selecting the desired tuner

To select a tuner, push and choose the source

number preassigned to Tuner 1 (XM) or Tuner 2

(AM/FM), or use the UNO numeric source inputs at

the bottom of the UNO-LRC1.

Selecting the desired band (AM/FM only)

Push to toggle between AM/FM reception.

Selecting a Mode (XM)

Push , or to toggle between XM

operating modes.

Exiting a Mode (XM)

Press or to exit XM operating mode menu.

Signal Strength mode (XM)

Press and hold and release. The display shows

the signal strength rating. To exit press .

Selecting the desired frequency or channel

Use the Channel and or and

for manual tuning. To move quickly through the channels, press and hold the button for more than

1.5seconds. To directly select a station or channel, enter the three- or four-digit channel or frequency (1071 for 107.1, etc.). European regions use five-

digit station frequencies.

Frequency Seek (AM/FM only)

The SEEK function is performed by pressing and

releasing the Select or or . To seek

higher frequency station press . Press for lower frequencies. Tuning begins at the current fre- quency, seeks upward (or downward) and stops at the

next tuned station. Pushing or again con- tinues the SEEK function. Once the highest frequency is reached, the tuner continues SEEK mode at the lowest frequency.

Frequency Scan (AM/FM only)

To scan, press and hold then release . The tuner scans through tuned stations with a 5-second preview before moving to the next station. To end

scanning, press again.

Selecting a Bank

To select a bank, press and hold for bank up

or for bank down.

Recalling a Memory Preset

Press and or and to scroll through a loop of all the memory presets for the cur- rently selected bank. Only configured presets will be displayed.

Mute

Press the button to mute/unmute the tuner audio output.

24

Page 24
Image 24
Russound ST2-XM manual UNO-LRC1 Remote Control with CAV6.6, UNO-LRC1 Remote Control Operation