Russound Factory Initialization Chassis, ST2-XMTUNER PROGRAMMING, ST2 Chassis Setup Procedures

Press and Hold TNR SEL button

TNR TNR

SEL SEL

ST2-XM TUNER PROGRAMMING

ST2 TUNER SETUP MENU

ST2 Chassis Setup Procedures

TUNER	SOURCE	UPDATE	FACTORY		SYSTEM	Chassis
SETUP	NUM	FIRMW	INIT		INFO	Setup
Menu	Procedure	Procedure	Procedure		Procedure	Menu
	TNR				TNR
	SEL
					SEL
			This
	TUNER	HOLD	Procedure
			returns the
	#	BAND
			ST2 Tuner
			to its
			Factory
			settings
		After update
		cycle Power
	SOURCE		Are you sure
	NUM
		Start
		Update
			YES	NO
		Cycle Power
			Please wait
			Cycle Power

4.“Hold BAND” appears on the tuner.

5.While pressing and holding BAND, “After update cycle power” appears on the tuner display.

6.When “Start Update” appears on the tuner dis- play, start the update program. “Finished” appears on the computer screen when complete.

7.Cycle power to the tuner.

Factory Initialization (Chassis)

The Factory Initialization procedure allows the erasure of all programmed settings and returns them to the factory default settings.

1.Enter the Setup Menu by pressing and holding

the TNR SEL button.

2.TUNER SETUP appears. Press MEM Up/Down until FACTORY INIT appears on the tuner.

3.Press BAND to enter the FACTORY INIT menu.

4.“Are you sure” appears on the tuner. Using the Tune Up/Down buttons, view the “Yes” and “No” selections.

5.Press BAND to select. A “No” selection

returns to the top of the Factory Init menu. A “Yes” begins the initialization.

6.“Please wait” appears on the tuner during the process and “Cycle Power” appears when com- plete.

7.Cycle power on the ST2-XM tuner.

27