ST2 TUNER PROGRAMMING
PROGRAMMING FOR CAV6.6 USE
To Program the ST2 Tuner to operate with the CAV6.6:
Once the CAV6.6 procedure is completed, perform the following setup of the tuner for use with the CAV6.6.
1.Enter the Setup Menu by pressing and holding the TNR SEL button.
2.Press MEM Up/Down buttons until SOURCE NUM appears on the tuner.
3.Press BAND to advance. TUNER # appears.
4.Press Tune Up/Down buttons to select the Tuner #.
5.Press BAND. SOURCE NUM appears again.
6.Press Tune Up/Down buttons to select the source # for the tuner (as determined in the CAV6.6 setup process).
7.Press BAND. TUNER # appears again.
8.Press Tune Up/Down buttons to select the other Tuner #.
9.Press BAND. SOURCE NUM appears again.
10.Press Tune Up/Down buttons to select the source # for this tuner (as determined in the CAV6.6 setup process).
11.Press TNR SEL twice to exit the Setup Menu and return to run mode.
ST2 Tuner Setup Menu
The ST2 Tuner Setup Menu provides procedures for assigning a custom name to a memory preset or a bank, and to choose a region for operation (US or Euro). The menu also outlines source number assignments and factory initialization procedures, and provides system information. The Setup Menu procedures can only be performed from the ST2 Tuner front panel. The following items make up the Setup Menu:
Memory Name, Bank Name, Source Number, Region, Factory Initialization and System Info.
Memory Name
A memory preset must be created and saved before it can be named. Once it is saved, the preset’s Tuner #, Bank # and Memory # must be entered in the following procedure.
1.Enter the Setup Menu by pressing and holding the TNR SEL button.
2.MEMORY NAME appears on the tuner.
3.Press BAND.
4.Press the Tune Up/Down buttons to select the Tuner #.
5.Press BAND to advance.
6.Press the Tune Up/Down buttons to select the Bank #.
7.Press BAND to advance.
8.Press the Tune Up/Down buttons to select a Memory #.
9.Press BAND to advance. MEMORY NAME appears again.
10.Press BAND to access the Memory Name entry screen.
(Continued on next page)
20
