Operators Manual | Ryobi BTS15 instruction

OPERATOR'S MANUAL

10 in. (254 mm) TABLE SAW BTS15

Your new Table Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.

Thank you for buying a Ryobi Table Saw.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Ryobi BTS15 manual Operators Manual, Save this Manual for Future Reference

Contents

Save this Manual for Future Reference Operators Manual Table of Contents Rules for Safe Operation Symbol Meaning Read ALL Instructions Blades Coast After Turn OFF Before Making a CUT, be Sure ALL Adjustments are Secure Safety and International Symbols Double Insulation ElectricalElectrical Connection Extension Cords Anti-Kickback Pawls Fingers Glossary of Terms Unpacking Socket Adjustable WrenchTools Needed Wrench #2 Phillips Screwdriver Framing Square Socket Wrench Key Description Qty Loose Parts List Following items are included with your table saw leg stand Getting to Know Your SAW FeaturesRiving Knife Operating Components Power Switch Product Specifications Speed and WiringBlades Precision Ground MICRO-GRAIN Carbide Teeth Blade Rotation Assembling LEG Stand AssemblyAssembling Storage Brackets To Mount the Table SAW to the LEG Stand To Install the Blade Adjusting Handle To Install Miter Table To Install RIP FenceTo Lock Miter Table RIP Fence Front Rail Table Lock Knobs To Install Blade Guard Assembly To Check SAW Blade InstallationHoles Attachment Nuts Tabs Mounting Plate Operation HOW to Mount a Featherboard HOW to Make a FeatherboardFeatherboard Types of Cuts To Adjust the Blade Angle To Adjust the Blade DepthTo SET the Scale to the Blade To USE Solid Table Extension To USE Outfeed SupportTo Make a Cross CUT Outfeed To Make a Miter CUT Switch KEYTo Make a Straight RIP CUT Blade RIP Fence Outfeed To Make a Bevel RIP CUT To Make a Bevel Cross CUTMiter Fence RIP Fence Bevel Locking Lever To Make NON-THROUGH Cuts To Make a Compound Miter CUT To Make Dado Cuts REMOVING/REPLACING the Throat Plate AdjustmentsTo Check the Alignment of the RIP Fence to the Blade Screw Clamp RIP Fence Blade Screws Locking Handle To Remove the Blade Pawls Spreader Blade Aligning Spreader with the Blade Bevel Bevel Locking Handle Lever To SET Blade AT 0 or To Ajust the Sliding Miter Table Assembly To Check Miter Base Parallelism Checking Sliding Miter Table Assembly To Check Miter Fence Alignment Making Adjustments to Sliding Miter Table Assembly To Adjust QUICK-STOP To Adjust the Miter Fence Maintenance Problem Possible Cause Solution Trouble Shooting Ryobi TECHNOLOGIES, INC Operators Manual 10 in mm Table Saw BTS15