Ryobi manual Operators Manual 10 in mm Table Saw BTS15, Ryobi TECHNOLOGIES, INC

OPERATOR'S MANUAL 10 in. (254 mm) Table Saw BTS15

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords should be used.

When working with a tool outdoors, use an extension cord that is designed for outside use. This is indicated by the letters "WA" on the cord's jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

**Ampere rating

	(on tool data plate)	0-2.0	2.1-3.4 3.5-5.0 5.1-7.0			7.1-12.0	12.1-16.0
Cord Length			Wire Size (A.W.G.)
25'		16	16	16	16	14	14
	50'	16	16	16	14	14	12
	100'	16	16	14	12	10	—

CAUTION: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on workpiece, tools, or other obstructions while you are working with a power tool.

**Used on 12 gauge - 20 amp circuit.

•SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

•MODEL NO.

The model and serial numbers of your tool will be found on the data plate attached to the tool. Please record the serial number in the space provided below.

• MODEL NUMBER BTS15

•SERIAL NUMBER

RYOBI TECHNOLOGIES, INC.

	1428 Pearman Dairy Road	Anderson, SC 29625
	Post Office Box 1207	Anderson SC 29622-1207
	Phone 1-800-525-2579
	www.ryobitools.com
983000-290
11-04	Page 38