Ryobi C2600 warranty Features

FEATURES

KNOW YOUR ABRASIVE CUT-OFF MACHINE

See Figures 2 and 3.

Before attempting to use your machine, familiarize yourself with all operating features and safety requirements.

WARNING:

Do not allow familiarity with your machine to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

MOTOR

See Figure 2.

This machine has a strong motor with sufficient power to handle tough cutting jobs. It also has externally accessible brushes for ease of servicing.

14 in. (356 mm) ABRASIVE WHEEL

See Figure 2.

A 14 in. (356 mm) abrasive wheel is included with your cut- off machine. It will cut materials up to 5 in. (127 mm) thick or 8 in. (203 mm) wide, depending upon the thickness or width of the material and the setting at which the cut is being made.

SELF-RETRACTING LOWER WHEEL GUARD

See Figure 2.

The lower wheel guard provides protection from each side of

the wheel. It retracts over the upper wheel guard as the wheel is lowered into the workpiece.

VISE CLAMP

See Figure 2.

A vise clamp has been provided with your cut-off machine. It is located on the end of the vise screw and provides greater control by clamping the workpiece to the fence. It also prevents the workpiece from creeping toward the wheel during a cutting operation.

ADJUSTABLE FLIP FENCE ASSEMBLY

See Figure 2.

The fence on your cut-off machine has been provided to support the workpiece and provide clamping support to the vise for holding your workpiece securely when making all cuts. It is an adjustable flip fence assembly that has been provided to make your cut-off machine more versatile. It adjusts 45° to the right for making angled cuts. It has an extension block that flips down when making cuts in tall or thick stock, such as square stock or tube stock. The exten- sion block flips up out of the way when making cuts in stock that is thin or wide, such as angle stock.

QUICK LOCK-RELEASE LEVER

See Figure 2.

A quick lock-release lever has been provided on your cut-off machine. This feature allows you to open and close the vise clamp quickly without repetitive turning of the vise crank handle.

MACHINE ARM

SWITCH TRIGGER

MOTOR
LOWER
WHEEL GUARD
ADJUSTABLE
FLIP FENCE
ASSEMBLY
EXTENSION
BLOCK	14 in. (356 mm)
QUICK LOCK-	ABRASIVE WHEEL
RELEASE LEVER

VISE

VISE CLAMP

CRANK HANDLE

	MACHINE BASE
VISE SCREW	Fig. 2
Page