Ryobi C2600 warranty Carrying Handle, LOCK-ON Button, Spindle Lock Button, Trigger Lock

FEATURES

CARRYING HANDLE

See Figure 3.

For convenience when carrying or transporting your cut-off machine from one place to another, a carrying handle has been provided on top of the machine arm as shown figure 3. To transport, turn off and unplug your machine, then lower machine arm and lock it in the down position. Lock machine arm by pushing in arm lock lever.

LOCK-ON BUTTON

See Figure 3.

Your cut-off machine is equipped with a lock-on feature, which is convenient when continuous cutting for extended periods of time is required. To engage the lock-on feature, depress switch trigger, push in and hold the lock-on button located on the side of the handle, then release switch trigger. Release lock-on button and machine will continue running.

To release lock-on feature, depress switch trigger and release.

If you have the lock-on feature engaged during use and your machine becomes disconnected from power supply, disengage the lock-on feature immediately.

SPINDLE LOCK BUTTON

A spindle lock button has been provided for locking the spindle which keeps the wheel in your machine from rotating. Depress and hold the spindle lock button while installing, changing, or removing wheel only.

TRIGGER LOCK

See Figure 4.

To prevent unauthorized use of your cut-off machine, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a shackle up to 13/64 in. diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.

SWITCH TRIGGER

PADLOCK

Fig. 4

CARRYING HANDLE	LOCK-ON
	BUTTON
SPINDLE
	MACHINE ARM
LOCK BUTTON

UPPER

WHEEL GUARD

POWER CORD

ARM

LOCK

LEVER

WRENCH

STORAGE

30

15

SWITCH TRIGGER

LOWER

WHEEL GUARD

14 in. (356 mm)

ABRASIVE WHEEL

QUICK LOCK-

RELEASE LEVER

0

8 mm
HEX KEY	ADJUSTABLE		VISE CRANK
FENCE			HANDLE
LOCK HANDLE	FLIP FENCE	VISE CLAMP
RUBBER FEET	ASSEMBLY	MACHINE BASE	Fig. 3
	Page