FEATURES

KNOW YOUR DRILL-DRIVER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

BIT STORAGE

Bits provided with the drill can be placed in the storage areas, located on the base of the drill.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your drill has a direction of rotation (forward/reverse/ center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

MAGNETIC BIT HOLDER

The magnetic bit holder extends the reach of the bit and holds the bit and screws until you are ready to drive them. Storage is located on the front of the drill’s base.

MAG TRAY

The Mag Trayconveniently stores screws or other small parts.

QUICK MODE SELECTOR

The Quick Mode Selector allows you to quickly switch from drive mode to drill mode.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application.

TWO-SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving at LOW (1) or HIGH (2) speeds. A slide switch is located on top of your drill for selecting either LOW (1) or HIGH (2) speed.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

9

Page 9
Image 9
Ryobi P201 manual Know Your DRILL-DRIVER, BIT Storage, Direction of Rotation Selector, Keyless Chuck, Magnetic BIT Holder