Manuals / Ryobi / Lawn and Garden / Blower

Ryobi RY09701, RY09600 manuel dutilisation Maintenance

Models: RY09701 RY09600

1 50
Download 50 pages 40.65 Kb
Page 14
Image 14

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during tool operation. If operation is dusty, also wear a dust mask.

WARNING:

Before inspecting, cleaning, troubleshooting, or servicing the machine, shut off engine, wait for all moving parts to stop, and disconnect spark plug wire and move it away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, lubricant, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating lubricants, etc., come in con- tact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrica- tion is required.

SPARK PLUG

This engine uses a Champion RCJ6Y or equivalent spark plug with .025 in. electrode gap. Use an exact replacement and replace annually, or more frequently if necessary.

WARNING:

Be careful not to cross-thread the spark plug. Cross- threading will seriously damage the product.

CLEANING THE EXHAUST PORT AND MUFFLER

Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance. We highly recommended that only qualified service technicians perform this service.

SPARK ARRESTOR

The spark arrestor must be replaced every 25 hours or yearly to ensure proper performance of the product. Spark arrestors may be in different locations depending on the model purchased. Please contact the nearest service dealer for servicing your spark arrestor.

WARNING:

Never run the blower without the spark arrestor in place. Failure to do so could result in a fire that could cause serious personal injury.

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately. Failure to do so could result in a fire that could cause serious personal injury.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine per- formance. If performance improves when the fuel cap is loosened, the check valve may be faulty or filter clogged. Replace the fuel cap if required.

STORING THE PRODUCT

Clean all foreign material from the product. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

Abide by all Federal and local regulations for the safe storage and handling of gasoline.

When storing 1 month or longer:

Drain all fuel from tank into a container approved for gasoline. Run engine until it stops.

12 — English

Page 13 Page 15
Page 14
Image 14
Ryobi RY09701, RY09600 manuel dutilisation Maintenance
Page 13 Page 15

RY09701, RY09600 specifications

The Ryobi RY09600 and RY09701 are two notable additions to Ryobi's diverse line of outdoor power equipment, designed to enhance efficiency and ease of use for homeowners and professionals alike. These models are engineered with cutting-edge technology, focused on delivering performance and durability.

The Ryobi RY09600 is a robust string trimmer, equipped with a powerful 26cc, 2-cycle engine that provides ample power for tackling thick grass, weeds, and light brush. This compact trimmer features a lightweight design, making it easy to maneuver in tight spaces. The RY09600 comes with an automatic feed spool, ensuring a consistent cutting line length without the need for manual adjustments. Additionally, it features a comfort grip handle that reduces vibration and increases control, allowing for extended use without fatigue.

On the other hand, the Ryobi RY09701 is a versatile, gas-powered blower that boasts a powerful 26cc engine, designed for both professionals and DIY enthusiasts. This blower is capable of delivering air speeds of up to 150 mph, effectively clearing leaves, debris, and grass clippings from various surfaces. The RY09701 features a lightweight design, which minimizes strain during prolonged use. An adjustable speed trigger allows for tailored airflow control, providing the user with the flexibility to manage different tasks efficiently. The blower's ergonomic handle ensures comfort, making it easier to navigate around gardens and driveways.

Both models benefit from Ryobi’s commitment to innovation, utilizing advanced technologies such as Easy Start, which simplifies the starting process. This feature is particularly advantageous for users who may struggle with traditional starting mechanisms. Furthermore, their construction includes durable components, ensuring longevity even under rigorous use.

In summary, the Ryobi RY09600 and RY09701 are exemplary tools for any outdoor maintenance task, combining power, ease of use, and user-friendly designs. With their high-performance engines, thoughtful features, and ergonomic designs, these tools offer exceptional value, making yard work simpler and more efficient. Whether used for trimming or blowing, these models reflect Ryobi’s dedication to providing quality equipment for outdoor enthusiasts.