TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
Line will not advance when using the
Line is welded to itself. Not enough line on spool.
Line is worn too short. Line is tangled on spool.
Lubricate with silicone spray.
Install more line. Refer to Line Replacement earlier in this manual.
Pull line while pressing button.
Remove line from spool and rewind. Refer to Line Replacement earlier in this manual.
Grass wraps around boom | Cutting tall grass at ground |
housing and line head | level. |
Cut tall grass from the top down to prevent wrapping.
Motor fails to start when switch | Battery is not secure. | To secure the battery pack, make sure the |
trigger is depressed. |
| latches on each side of the battery pack snap |
|
| into place. |
| Battery is not charged. | Charge the battery pack according to the |
|
| instructions included with your model. |
|
|
|
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi® Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
10 — English
