OPERATION

CHOICE OF BLADE AND SPEED

The scroll saw accepts a wide variety of blade widths and thicknesses for cutting wood and other fibrous materials. Your saw uses 5 in. long blades of either the pin end or the plain end style. The blade width and thickness and the number of teeth per inch to use are determined by the type of material and the size of the radius being cut.

Note: As a general rule, always select narrow blades for intricate curve cutting and wide blades for straight and large curve cutting.

 

 

 

Speed or

 

 

Teeth/Inch

Width

Thickness

Strokes Per

 

Material Cut

 

 

 

Minute

 

 

10

.110 in.

.020 in.

500-1600

Popular size for cutting hard and soft

 

(2.8 mm)

(0.5 mm)

 

woods 3/16 in. (4.8 mm) up to 2 in. (51 mm)

 

 

 

 

Plastics, paper, felt, bone, etc.

7

.067 in.

.020 in.

750-1250

Wood, plastics, extremely thin cuts on

 

(1.1 mm)

(0.5 mm)

 

materials 3/32 in. (2.4 mm) to 1/2 in.

 

 

 

 

(13 mm) thick.

 

13

.037 in.

.015 in.

500-1000

For tight radius work in thin materials

 

(0.5 mm)

(0.4 mm)

 

3/32 in. (2.4 mm) to 1/8 in. (3 mm) wood,

 

 

 

 

veneer, bone, fiber, ivory, plastic, etc.

BLADE INFORMATION

 

 

LOCK POST

ON / OFF KNOB

■ Scroll saw blades wear out and must be replaced fre-

 

 

quently for best cutting results. Scroll saw blades gener-

 

 

ally stay sharp for 1/2 hour to 2 hours of cutting, depend-

 

 

ing on type of material and speed of operation.

 

 

 

■ In cutting wood, best results are achieved when cutting

 

PADLOCK

wood less than one inch thick.

 

 

 

 

 

 

 

■ When cutting wood thicker than one inch, the user must

 

 

guide the workpiece very slowly into the blade and take

 

 

extra care not to bend or twist the blade while cutting.

 

 

■ When choosing a blade, carefully consider the following:

 

 

• Very fine, narrow blades should be used to scroll cut in

 

 

thin material 1/4 in. (6 mm) thick or less.

 

 

 

• Most blade packages state the size or thickness and

 

 

type of material which that blade is intended to cut. The

 

 

package should also state the radius or size of curve

 

 

that can be cut with that blade size.

 

 

 

• Wider blades cannot cut curves as tight or as small as

 

 

thinner blades.

 

 

 

 

 

■ Blades wear faster when:

 

 

 

Fig. 14

• Cutting plywood, hardwood, and other laminates.

 

 

• Cutting material thicker than 3/4 in. (19 mm).

 

 

 

• Side pressure is applied to the blade.

 

 

 

LOCK POST

See Figure 14.

To prevent unauthorized use of your scroll saw, we suggest that you disconnect it from the power supply and lock the knob in the OFF position. A padlock should be used. When the lock is installed and locked, as illustrated, the switch is inoperable. Store the padlock key in another location.

■To lock the saw in the OFF position, install a padlock through the lock post beside the knob as illustrated and lock the padlock. (Padlock is not supplied with the saw.)

WARNING:

For your own safety, always push the knob OFF when machine is not in use. Also, in the event of a power failure, push knob OFF. Lock the scroll saw switch OFF with a padlock. This will prevent the machine from starting up again when the power comes back on. Failure to heed this warning can result in serious personal injury.

Page 16

Page 15 Page 17
Page 16
Image 16
Ryobi SC180VS manual Choice of Blade and Speed, Blade Information, Lock Post On / OFF Knob, Padlock
Page 15 Page 17

SC180VS specifications

The Ryobi SC180VS is a versatile and powerful scroll saw that stands out in the realm of woodworking tools. It is specifically designed to cater to both hobbyists and professionals, delivering precision and ease of use.

One of the most notable features of the SC180VS is its variable speed control, which allows users to adjust the blade speed from 400 to 1,600 strokes per minute. This functionality enables woodworkers to make intricate cuts on various materials, including wood, plastic, and even metal, by simply adjusting the speed to suit the specific project requirements. The ability to customize blade speed enhances control and reduces the chances of material splintering or burning.

The SC180VS comes equipped with a robust 1.2-amp motor that provides efficient power for cutting through different thicknesses of material. Whether you're working on detailed patterns or larger projects, this scroll saw is engineered to perform with reliability. The tilt table, which can be adjusted up to 45 degrees, further enhances versatility, enabling users to make bevel cuts with great precision.

Another standout feature is the easy blade-change mechanism. The SC180VS utilizes a tool-less blade changing system, which allows for quick and hassle-free swapping of blades. This is an essential characteristic when transitioning between different projects, as it minimizes downtime and keeps the workflow moving smoothly.

Safety is also a priority with the Ryobi SC180VS. The saw includes a transparent blade guard that not only protects users from potential hazards but also provides clear visibility of the cutting area. An integrated dust blower helps maintain a clean workspace by keeping sawdust away from the cutting line, ensuring improved accuracy during operation.

The compact design of the SC180VS makes it easy to store and transport, making it an ideal choice for both small workshops and mobile operations. Its stable base and heavy-duty construction ensure durability and reduce vibrations, providing a smooth cutting experience.

Overall, the Ryobi SC180VS is an exceptional scroll saw, combining innovative features, impressive technology, and user-friendly design. Whether you're a beginner or a seasoned woodworker, this machine promises to enhance your crafting experience while delivering exceptional results. With its blend of performance, speed control, and safety features, the SC180VS is a reliable addition to any woodworking toolkit.
Top Page Image Contents