FEATURES

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks your saw at desired miter angles.

SPINDLE LOCK BUTTON

See Figure 4.

A spindle lock button has been provided for locking the spindle of your saw in a stationary position. Only depress and hold the spindle lock button while installing, changing, or removing blade.

TRIGGER LOCK

See Figure 5.

To prevent unauthorized use of your miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock through the hole in the switch trigger. A lock with a long shackle up to 19/64 in. (7 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.

POSITIVE STOPS ON MITER TABLE

Positive stops have been provided at 0°, 15°, 22-1/2°, 30°, and 45°. The 15°, 22-1/2°, 30°, and 45° positive stops have been provided on both the left and right side of the miter table.

ELECTRIC BRAKE

An electric brake has been provided to quickly stop blade rotation after the switch is released.

FENCE

The fence on your miter saw has been provided as a support to hold your workpiece securely against when making all cuts.

SELF-RETRACTING LOWER BLADE GUARD

The lower blade guard is made of shock-resistant, see- through plastic that provides protection from each side of the blade. It retracts over the upper blade guard as the saw is lowered into the workpiece.

CARRYING

HANDLE

LOCK

PIN

SAW

ARM

15

15

30

45

MITER LOCK

HANDLE

SAW ARM

 

LOCKED IN DOWN POSITION

Fig. 3

SPINDLE LOCK

 

BUTTON

SWITCH

 

 

TRIGGER

Fig. 4

SWITCH

TRIGGER

PADLOCK

Fig. 5

Page 9

Page 9
Image 9
Ryobi TS1302 Miter Lock Handle, Spindle Lock Button, Trigger Lock, Positive Stops on Miter Table, Electric Brake, Fence