ASSEMBLY
STOP BLOCK
See Figures 15 -16.
The stop block is included with the table extensions and is useful as a stop for making repetitive cuts to the same length. It can be installed on either side of the saw base:
n Slide the stop block on the back arm of either table extension, then insert the table extensions into the saw base.
nUse the small wing screw to secure the stop block to the table extensions.
�n Loosen the small wing screw and adjust the stop block the desired distance from the blade for the cut to be made. For accurate placement of the stop block, measure the distance from the teeth set on the blade to the stop block.
�n Tighten wing screw securely. �n Plug the saw in.
�n Make a test cut in scrap material and measure the length of the workpiece.
�n Make any necessary adjustments.
STOP BLOCK
SMALL 
WING 
SCREW
TABLE BASE 
EXTENSION
Fig. 15
STOP
BLOCK 
Fig. 16
17
