OPERATION
CLEANING YOUR HAND VAC
See Figures 5, 6 and 7.
WARNING:
Never use your hand vac without dust bowl and filter properly in place.
The dust bowl should be checked, emptied and cleaned periodically to obtain maximum dust collection.
TO REMOVE DUST BOWL
See Figure 5.
■Depress the release button located on top of hand vac. Pull dust bowl down and out as shown to sepa- rate from motor housing.
PRESS RELEASE BUTTON
PULL DUST BOWL
DOWN AND OUT
TO REMOVE
Fig. 5
■Remove the filter by simply pulling it out of dust bowl. See Figure 6.
HAND VAC
DUST BOWL
FILTER
BATTERY PACK
Fig. 6
■Shake or lightly brush any dust or dirt off filter.
■Empty dust bowl and wash if necessary. Make sure dust bowl is completely dry before reattaching to hand vac.
TO REATTACH DUST BOWL
See Figure 7.
■Position the two sections as shown. Align slots on bottom of dust bowl with tabs on bottom of motor housing then snap the two sections together.
TABS
SLOTS
Fig. 7
9
