FEATURES
PRODUCT SPECIFICATIONS
Chuck | 1/2 in. Keyless | Clutch | 24 position | ||
Motor | 18 Volt DC | Torque | 330 in.lb. | ||
Switch | Variable Speed | Hammer Speed | |||
No Load Speed | *Blows Per Minute |
|
| ||
|
|
| |||
|
|
|
|
|
|
KNOW YOUR HAMMER DRILL
See Figure 1, page 13.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
Auxiliary Handle
Your drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control.
BIT STORAGE
Bits provided with the drill can be placed in the storage area, located on the base of the drill.
BLOWS PER MINUTE
This tool features an impact speed of
DEPTH STOP ROD
A depth stop rod has been supplied with this product to assist in controlling the depth of drilled holes.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/center lock)
Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to
LEVEL drilling
A level is located on the top of the hammer drill. It can be used to keep drill bits level during horizontal drilling operations.
MAGTRAY™
The magnetic tray conveniently stores screws or other small parts.
QUICK MODE SELECTOR
The Quick Mode Selector allows you to quickly switch from drive mode to drill mode.
TORQUE ADJUSTMENT RING
Your drill has a
TWO-SPEED GEAR TRAIN
The
VARIABLE SPEED
The switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
6 — English
