16ENGLISH
C |
|
Intenza Aroma System AB | 2 3 4 Machine water hardness setting |
| 1 |
| Green |
| Yellow |
| Yellow |
Measuring and programming water hardness
Measuring water hardness is very important for defining the frequency in which the machine has to be descaled and to install the “INTENZA+” water filter (for more detail on the water filter see next chapter).
To measure the water hardness follow the steps below:
1Immerse the water hardness tester strip (supplied with the machine) in water for 1 second.
Note:
The tester strip can only be used for one measurement.
2Wait for one minute.
3Check how many squares have changed the colour to red and then consult the table.
Note:
The numbers on the water hardness tester strip correspond to the water hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the “INTENZA+” water filter. (see next chapter for this).
4Press the “
” button and scroll the pages by pressing the “
” button until the following icon is displayed.
Note:
The machine is supplied with standard water hardness setting, suitable for most of the types of water.
5Press the “
” button to increase the value or the “
” button to decre- ase the value.
6 Press the “
” button to confirm the setting.
