46 ENGLISH
Machine actions | Causes | Solutions |
The machine grinds the | There is no water. | Fill the water tank and prime the |
coffee beans but no coffee |
| circuit (chapter “Using the machine |
comes out. |
| for the first time”). |
(See note) | The brew group is dirty. | Clean the brew group ("Weekly clea- |
|
| ning fo the brew group" chapter). |
The circuit is not primed.
Prime the circuit (chapter “Using the machine for the first time”).
| This might occur when the ma- | Brew a few cups of coffee as de- |
| chine is automatically adjusting | scribed in chapter "Saeco Adapting |
| the dose. | System". |
| The dispensing spout is dirty. | Clean the dispensing spout. |
Coffee is too weak. | This might occur when the ma- | Brew a few cups of coffee as de- |
(See note) | chine is automatically adjusting | scribed in chapter "Saeco Adapting |
| the dose. | System". |
Coffee is brewed slowly. | The coffee grind is too fine. | Change coffee blend or adjust the |
(See note) |
| grind as explained in chapter “Adju- |
|
| sting the ceramic coffee grinder”. |
The circuit is not primed.
Prime the circuit (chapter “Using the machine for the first time”).
The brew group is dirty.
Clean the brew group ("Weekly clea- ning fo the brew group" chapter).
Coffee leaks out of the dispensing spout.
The dispensing spout is clogged. | Clean the dispensing spout and its |
| holes. |
Note:
These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a
