Preparing for Use (Cont.)
5.WITHOUT TURNING THE ROTISSERIE ON YET, use the Cover Handles to raise the Cover.
6.Hold the Rotisserie Bar Assembly so the End Wheel with the gear faces to the right. Slide the Rotisserie Bar into the Rotisserie along the Rotisserie Bar Assembly Track. See Figure 1. Make sure each end of the center Bar Assembly drops into the center grooves of the Rotisserie Bar Track.
Figure 1
Assemble Drip Tray
1.If not in place, slide Drip Tray into position, as shown in Figure 2.
Insert Reflector
1.Grasp the Handle and slide the Reflector behind the Heating Elements. See Figure 3. Make sure the notches hook over the Heating Element brackets. The bottom of the Reflector must angle over the Drip Tray.
Figure 2
Figure 3
12
