11
End Wheel with Gear
End Wheel with Thumb Screw
1. Locate the Rotisserie Bar Assembly.
2. The Rotisserie Bar assembly consists of two End Wheels. One End Wheel (M) has a gear, center bar and two meat tines attached to it. The other End Wheel (L) has two meat tines and a Thumb Screw lock- ing device.
3. Loosen the Thumb Screw and pull the End Wheel off the center bar of the Rotisserie Bar Assembly. Carefully slide the food to be cooked onto the center bar and meat tines of the geared End Wheel.
4. Once the food is in place, align the End Wheel with Thumb Screw on the center bar of the Rotisserie Bar Assembly such that the tines are at 90˚ angles to those on
opposite side, as seen in the view to the right. Push
the End Wheel with Thumb Screw toward the geared End Wheel as far as possible. Tighten the
Thumb Screw to lock the End Wheel in place.
Prepare Food
We recommend preparing the food to be cooked before proceeding with any Rotisserie assembly. Cut all vegetables to be cooked or prepare a homemade marinade for extra flavor (see “Recipes” for information about Marinades and Rubs). If necessary, store food in refrigerator while prepar- ing Rotisserie.
Before placing any items to be cooked onto the Rotisserie Bar Assembly, Adjustable Flat Basket or Veggies/Air Bake Basket, we suggest familiariz- ing yourself with how the Rotisserie operates and how each accessory is assembled and used in the Rotisserie.
Rotisserie Bar Assembly

Preparing for Use

WARNING: Do not attempt to assemble parts inside the Rotisserie while it is plugged in or hot. Burns or other serious injuries can occur.

Before Using Rotisserie for the First Time

Before using your George Jr.™ Rotisserie for the first time, wash all accessory parts with hot, soapy water. Rinse all parts well and dry thoroughly. Be sure the Rotisserie is unplugged and use a damp cloth or sponge to wipe down the inside and outside of the Rotisserie.

CAUTION: Never immerse the Rotisserie in water or any other liq- uid!