
Instructions for Use
BEFORE USING FOR THE FIRST TIME
1.Before using the Programmable Pressure Cooker for the first time, wash the Removable Cooking pot, the
2.Make sure the Rubber gasket is seated properly around the Lid. To ensure correct fitting of the Rubber Gasket, fill the Removable Cooking Pot 2/3 full with water and run on HIGH PRESSURE for 15 minutes. Wait 15 minutes, then release pressure by pressing on the QUICK STEAM RELEASE Button in short bursts. The Pressure Indicator Rod will drop. Let the appliance cool to room temperature. Pour out the water. Rinse and towel dry the Removable Cooking Pot. The Pressure Cooker is now ready to be used.
BEFORE YOU BEGIN COOKING EACH TIME
For best results, always check that the Pressure Regulator knob, Pressure Indicator, Steam Release Valve and Safety Valves are in good working order and that there are no foreign particles
blocking the Valve openings on the underside | Rubber Gasket | |
of the Lid. See Care and Cleaning Instructions. | Lid | |
| ||
IMPORTANT: The Rubber Gasket must be |
| |
placed properly over the four hooks in the Lid | Hook | |
as shown. | ||
|
POWER SURGE PROTECTION FEATURE
This Pressure Cooker has a
NON-STICK SURFACE
Be sure to always use either plastic or wooden utensils so as not to scratch the
Operating Instructions
1.Plug the cord into a
2.Position the Removable Cooking Pot in the Housing so that its Rear Centering Guide slides into the Slot for Centering Guide on the inside of the Housing.
3.Choose the desired program by pressing either WARM, COOK MODE: (BROWN or STEAM), or PRESSURE MODE: (HIGH or LOW).
9