Samson MIXPAD manual Appendix a Operating the Mixpad 12/9 off Battery Power

Appendix A: Operating the MIXPAD 12/9 off Battery Power

The MIXPAD 12 and MIXPAD 9 can optionally be battery powered. This requires the use of two 12 Volt rechargeable Lead-Acid (Gelcell) batteries, connected to the rear panel AC connector, wired as shown in the illustration below. These batteries will provide the necessary bi-polar voltages needed to operate and maintain excellent audio quality.

1 m

1 piece

M9/M12 Connector

Standard 5 Pin DIN (MIDI) Connector

Male Male

"T" Connector

(2 pieces)

20cm

Jumper

(2 pieces)

20cm

Phantom Power

+12V

-12V

Ground

Ground

All Quick Disconnects are Female except where noted. All Male and Female Quick Disconnects are fully insulated and .187"

Female .187" Quick Disconnect

Male .187" Quick Disconnect

				Rear View of Connector for soldering
						Pin 1 = +15V
				1	3	Pin 2 = Ground
						Pin 3 = Ground
			45º	4	5
						Pin 4 = -15V
				2
						Pin 5 = Phantom Power
-12V	Ground	Ground	+12V			Phantom Power
				"T" Connector		Jumper
		All Batteries .187" Male Quick Disconnect
			34