Top Panel Controls

Digital Effects Section (MXP124FX only)

The following section describes the features control of the onboard 24-bit digital Multi-effects section.

16.PROGRAM Effects Display - The mixer’s multi-effects processors feature a dual digit, seven-segment numerical display for showing the effects PROGRAM number from 00 - 99.

17.SELECT Control Knob - The SELECT control knob is a continuously variable encoder to call up one of the 100 built-in digital effects presets. Rotate the SELECT knob to scroll through the preset programs and press to load the selected effect.

18.On/Peak Indicator - This LED indicator lights green when the Digital Effects is turned on. The indicator lights red when the input signal to the internal Digital Effects is overloaded.

19.Effects ON Switch - The effects ON switch is used to turn the internal digital effect on and off. The effects are by- passed when the switch is in the out position.

20.MAIN MIX Control - The MAIN MIX control is used to adjust the level of the effects from the built-in digital effect that is sent to the MAIN MIX bus. This allows you to hear the DSP effects in your main speakers.

16 17

18

19

20

14