Adding Digital Effects (MXP124FX Only)

The MXP124FX features built-in, high quality, 24-bit Multi Effect Processors, offering 100 studio grade effects presets. The DIGITAL EFFECTS section features clean Delays, lush Reverbs and multi-effects like Delay + Reverb. The following details the operation of the internal DSP effects in the DIGITAL EFFECTS section.

1. Connect a mic or instrument to the desired channel, adjust the level and equalizer to your liking and make sure the MAIN MIX fader level is set so you can hear it in your speakers.

2.Press the effects ON button to activate the digital effects channel strip.

3. Select the desired effects program using the SELECT control knob located in the middle of the channel strip. Rotate

the SELECT switch to one of the 100 effects and press to confirm the selection.

4. Set the effects to MAIN MIX control to the 12 o’clock position.

5. Use the FX control on the input channel to adjust the level of signal to sent to the effects. If the Peak indicator flashes red, the signal is overloading the DSP, lower the channel FX controls until the indicator no longer lights red.

Note: The signal feeding the FX control is sent after the channel Fader, so the channel Fader has an effect on that level, meaning the FX level tracks up and down with the channel Fader..

8