Samson MXP124, MXP124FX 18

Wiring Guide

There are several ways to interface the MXP mixer to support a variety of appli- cations. Follow the cable diagrams below for connecting your mixer.

RCA

Pin 2 (hot)		Hot to Tip	Tip (signal)
			Tip (signal)
Pin 3 (cold)
	Male XLR		Sleeve (ground)
Pin 1 (shield)		Shield & Cold to Sleeve	Sleeve (ground)
Pin 1 (shield)		Shield & Cold to Sleeve
Tip (+Signal)	Ring (-Signal)	Tip to Tip	Tip (signal)
			Tip (signal)

Balanced ¼” Connector

	Sleeve (ground)	Sleeve & Ring to Sleeve
	Tip (signal)	Tip to Tip
	Unbalanced ¼” Connector
	Sleeve (ground)	Sleeve to Sleeve
	Unbalanced ¼” Connector	Hot to Tip
	Pin 2 (hot)	Hot to Tip
	Pin 2 (hot)
	Male XLR
	Pin 1 (shield)	Shield & Cold to Sleeve
	Pin 3 (cold)	Shield & Cold to Sleeve
	Pin 3 (cold)
	Balanced ¼” Connector	Hot to Tip
	Pin 2 (hot)	Hot to Tip
	Pin 2 (hot)
	Male XLR
	Pin 1 (shield)	Shield & Cold to Sleeve
	Pin 3 (cold)	Shield & Cold to Sleeve
	Pin 3 (cold)

Sleeve (ground)

Tip (signal)

Sleeve (ground)

Tip (signal)

Sleeve (ground)

Tip (+Signal)

Ring (-Signal)

Sleeve (ground)

18

Contents

Page Page Page Page Page Page “LAST ON, FIRST OFF.” Page Page Page Mono Input Channel Section FX Auxiliary Control (MXP124FX) PAN Control PEAK Indicator Volume Fader Stereo Input Channel Section Digital Effects Section (MXP124FX only) Master Section USB RETURN (MXP124FX only) and TAPE IN Control MAIN MIX Fader A B C AC ADAPTER INLET POWER USB Port (MXP124FX Only) Page Frequency Response (Trim @ Min, unity gain ± 3 dB) T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF) Equivalent Input Noise (“A” filter on, input shorted) Maximum Voltage Gain Crosstalk (@ 1 kHz w/ 30 kHz LPF) Page Number Effect Parameter Microphone Stand Mounting Accessory (Sold Separately) (A) (B) (C)