Controls and Functions
Rear Panel Layout
AAC INPUT FUSE HOLDER – Connect the supplied 3- pin IEC power cable here.
BZONE 1 OUTPUT – This connector includes the Zone 1 Left and Right balanced output connections, along with the connections for the REMOTE volume con- trol.
CZONE 2 OUTPUT – This connector includes the Zone 2 Left and Right balanced output connections, along with the connections for the REMOTE volume control.
DZONE 3 OUTPUT – This connector includes the Zone 3 Left and Right balanced output connections, along with the connections for the REMOTE volume control.
EZONE 4 OUTPUT – This connector includes the Zone 4 Left and Right balanced output connections, along with the connections for the REMOTE volume control.
FLINE 3 AND 4 INPUT - This connector is used to hook up the LINE 3 and 4 Left and Right input con- nections.
GDUCK TRIM – This rotary control is used to adjust how much signal level is dropped when the micro- phone activates the DUCK circuit.
HMIC/LINE 2 – This connector includes the connec- tion for a stereo line level and mono microphone input for channel 2.
IMIC TRIM – The rotary control is used to adjust the input sensitivity of the microphone pre amplifier on channel 2.
JMIC/LINE 1 – This connector includes the con- nection for a stereo line level and mono micro- phone input for channel 1.
KMIC TRIM – The rotary control is used to adjust the input sensitivity of the microphone pre amplifier on channel 2.
LCH 1 MASTER switch – This switch is used to enable the ducking function on channels 2, 3 and 4.
MDUCK ENABLE– Channel 2 will act as a ducking master when this switch is pressed in and the volume of channels 3 and 4 will automatically be lowered when the there is a microphone signal on Channel 2.
NDUCK ENABLE – Channel 1 will act as a duck- ing master when this switch is pressed in and the volume of channels 3 and 4 will automati- cally be lowered when the there is a micro- phone signal on Channel 1.
5
