Samson UHF Series One owner manual Guided Tour - UT1L / UT1G, English, Samson

Guided Tour - UT1L / UT1G

ENGLISH

8

9

SAMSON

7

10

8:Power on-off switch* - Use this to turn the UT1L / UT1G on or off (to conserve battery power, be sure to leave it off when not in use).

9:Audio Input Level control (trimpot) - This input sensitivity control has been factory preset to provide optimum level for the particular lavalier or headset model being used (in the case of the UT1G, it is preset for optimum instrument level) and so we recommend that this not be adjusted manually. If necessary, however, you can use the supplied plastic screwdriver (see #10 below) to raise or lower the UT1L / UT1G input level. See the “Setting Up and Using the UM1 System” section on page 8 in this manual for more informa- tion.

10:Plastic screwdriver - Specially designed for use in adjusting the UT1L / UT1G Audio Input Level control (see #8 above) and/or UM1 Squelch control (see #7 on page 3). See the “Setting Up and Using the UM1 System” section on page 8 in this manual for more information.

*Be sure to mute the audio signal at your external mixer or amplifier before turning transmitter power on or off, or an audible pop may result.

8