OSD Functions
4. Channel Control
The channel change function is available only in TV mode or when the PIP feature is ON in PC mode and the PIP source is set to TV. (You can change the channel in PC mode when the PIP feature is ON. )
For detailed information on Screen Adjustment in the Channel Control, refer to the Channel Control Adjustment Animation Clips.
OSD Description
Air/CATV The channel system can be set in several different ways.
•Air
•STD
•HRC
•IRC
STD, HRC, IRC and Air identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your particular area.
Auto | The TV automatically cycles through all of the available channels and stores them in |
Program | memory. This takes about one to two minutes. |
| In rare cases, "Auto program" may miss a few channels due to weak signals and the |
| channels may not be added to the channel memory. |
Add/Delete | Adds or erases channels from the memory. |
Fine Tune | Due to weak signals or an incorrect antenna configuration, some of the channels may not be |
| tuned correctly. |
