Samsung AH68-01467F Connecting the yepp to a PC with a USB cable, How to check the USB driver

Connecting the yepp to a PC

Connecting the yepp to a PC with a USB cable

4 Connect a USB cable to the USB port on the computer.

5 Connect the opposite end of the USB cable to the USB cable port on the right side of the yepp.

● If you disconnect the USB cable from your PC while implementing a command or initializing during

USB driver installation, your PC may not function correctly.

	The USB driver is installed with a message saying that	USB
	display screen during installation.	connect
6 it is searching for a new device. You may not see the
	Go to the device manager to check that	cable
	installation has been successfully completed.
7	Upon installation of the USB driver
	"SAMSUNG YP-60"will appear in the
	[Start] → [Settings] → [Control Panel] →
	[System Properties] → [Device Manager].

How to check the USB driver

●Windows 98/ME:

Control Panel → System → Device Manager → Disk drives → SAMSUNG YP-60

●Windows 2000:

Control Panel → System → Hardware → Device Manager → Disk drives →

SAMSUNG YP-60 USB Device

●Windows XP:

Control Panel → System → Hardware → Device Manager → Disk drives →

SAMSUNG YP-60 USB Device

8 When the USB driver is not installed automatically, refer to the next page.

16 17