Setting
the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1 | In Stop mode, | 2 | Press Cursor | 3 | Press Cursor button | |
button to move to | to move to ‘TEST | |||||
|
|
| ||||
| press MENU |
|
| |||
|
| ‘Audio’ and then |
| TONE’ and then press | ||
| button. |
|
| |||
|
| press ENTER button. |
| ENTER button. |
• The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again at this time, the test tone will stop.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
SETUP
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode.
•Use this function to check that each speaker is correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L) | C: Center Speaker | SW: Subwoofer |
R: Front Speaker (R) | LS: Rear Speaker (L) | RS: Rear Speaker (R) |
Start
52
