![Can't select Dolby Pro](/images/new-backgrounds/20402/2040295x1.webp)
Symptom | Check | Remedy |
Can't select Dolby Pro
Logic ll Mode.
There is no sound when playing DTS encoded DVD and CD.
•Is the input signal selected properly?
•Is analog input selected?
•Select 2 channel Dolby Digital, PCM, and Analog input signal.
•Check whether digital external component is properly connected and refer to page 22 to select the digital input.
Product Protection Function
Heat Protection
•Protection function works if the main unit is overheated or power transformer is overheated.
"" appears in the display when this function
works.
-If speaker terminal is shorted
-If speaker cord is shorted
If there is no problem when you turn it on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly.
•If PROTECTION appears on the display, check whether speaker terminal is shorted and then turn on the device.
MISCELLANENOUS
47