Setting
DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
√ 
REMOTE CONTROL
Press DRC button.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
MAIN UNIT
1 Press SETUP button.
• “SETUP MODE” appears on the display and enters into Setup Mode.
2 Press FUNCTION button 4 times.
• “DRC SETUP” appears on the display.
3 Press SURROUND button.
• “DRC : STD” appears on the display .
4 Press SELECT( 
, 
) button to set DRC.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
To Exit Setup Mode
• Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
Setting DRC•STD : Sets DRC effect to standard.
•MAX : Sets DRC effect to maximum.
•MIN : Sets DRC effect to minimum.
OPERATION
25
