Multi-Tech Systems RF802EW Accessing a Unix Server, Set Dial-up type NT/Novell Server Connection

Chapter 7 - LAN Client Settings

Set Dial-up type (NT/Novell Server Connection)

Windows 95/98:

1.Right-clickthe newly created connection icon, then click Properties; the My Connection dialog box opens.

2.On the General tab, click Server Type. The Server Types dialog box opens. Select PPP: Windows 95, Windows NT 3.5, Internet.

3.Select only the Log on to network, Enable software compression, and TCP/IP check boxes. Note: do not disturb any other items that are already checked.

Dial in to your network (NT/Novell Server Connection)

Windows 95/98:

1.You are ready to dial in to your network.

2.Double-click the new connection icon. The Connect To dialog box opens.

3.Enter the user name (if necessary) and password configured for you on the RF802EW. Note: If your particular situation permits, select the Save password check box.

4.Click Connect.

5.After connecting to the RF802EW, you can access the same services and resources as if you were connected to the network locally.

Accessing a Unix Server

Perform the following procedures to prepare your PC workstation to access a remote Unix Server.

Adding the dial-up adapter (Unix Server Connection)

Windows 95/98/NT:

1.Click Start Settings Control Panel.

2.Double-click the Network icon to open the Network dialog box.

Win95 Win98

88