Chapter 5 - RouteFinder Manager
Remote Access Settings
1.From the General Settings dialog box, select the Remote Access option and click Remote Access Settings.
2.The Remote Access Settings dialog box displays.
Enter the following:
IP Assigned Method for Remote Clients
A remote client must have an IP address to connect to the network. IP addresses may be assigned automatically from a designated IP address pool using DHCP, or the IP address may be manually assigned.
Assign an IP Address Automatically
The DHCP feature will issue the remote site user an IP address automatically if the DHCP function is enabled. If DHCP is disabled, the device will automatically search for a DHCP server and request an IP address for the remote client.
Assign an IP address manually
Enter an IP address for the remote client.
Network Protocols
You must select the network protocols you would like to enable for the
IPX/SPX Frame Type
The RF802EW can automatically detect what kind of IPX/SPX frame type you are using. You may manually select a frame type by using the list box.
Remote Client Authentication
Remote authentication settings allow you to specify how you would like to authenticate remote users. You may select Use Local Client List or Use RADIUS Authentication (refer to Remote Connection Authentication Settings in this chapter for more information). Choosing RADIUS configuration allows you to use the user information (such as user name, password, and IP address) stored on a separate RADIUS server on the network.
3. Click OK when complete.
40
