Chapter 1 - Introduction
Front Panel
RF802EW Front Panel
Front Panel Description
Link Lights when the LAN client is correctly connected to the 10/100 LAN.
ACT Blinks when transmitting or receiving packets.
LAN Lights when a successful connection to the 10/100 LAN is established.
WLS Lights when a wireless connection is established.
Serial Lights when the Serial async port is properly connected to a remote site.
WAN Lights when a successful connection to the
Status Blinks when updating flash ROM or rebooting.
Power Lights when power is being supplied to the router.
Back Panel
| RF802EW Back Panel |
Back Panel Description | |
Power 5VDC | The 5V DC power socket is used to connect the device to the AC power |
| adapter. |
10 BT WAN | The WAN port is used to connect the router to a DSL or Cable modem. |
SERIAL | The Serial async port connects the router to a standard modem (optional). |
10/100M | Connects the Router to a 10/100 |
Reset | Press and hold for three seconds to reset the router to factory defaults. |
Uplink/Normal | Slide the switch to the Uplink position to use the LAN port to expand your |
| network by connecting a network cable to another router, switch, or hub. To |
| connect the port to a LAN client workstation, slide the switch to the Normal |
| position. |
8
