Chapter 9 - Troubleshooting
•If the scenario described above does not fit your situation, use RouteFinder monitor to view all events that are taking place between the modem and your ISP as you attempt to make a connection (a busy signal).
Problem #8
After installing my RF802EW, my modem connection seems to be slower.
•The RouteFinder device should have no effect on the modem speed. However, if more than one client is using the same modem through the RouteFinder, the speed will be reduced.
•Run RouteFinder Monitor to view the number of concurrent client connections to your ISP.
Problem #9
While the Serial async port is in use, my RF802EW keeps dialing a connection to the Internet, but no one is using the Internet.
•The RF802EW will only dial the connection if there is a request from one of the computers on the LAN for an IP address on the Internet. Keep in mind that certain applications can be configured to request information from the Internet. For example, Microsoft Outlook can be set up to “check for new mail every x minutes”. If this feature is enabled, Outlook will send a request for your Internet POP3 server which will cause your RF802EW to
Problem #10
The “Please set the Device IP” screen displays when configuring the RF802EW.
•This system detects that the RouteFinder’s LAN Ethernet IP address is not in the same subnet as the PCs. Use RouteFinder Manager to set the RouteFinders’ IP address to the same network as your PC’s.
Problem #11
A message appears indicating the IP address you have inputted is either not valid on your network or is in conflict with another IP address.
•The manager has detected the IP address of the RF802EW you are configuring is in conflict with another device. Power off the conflicting device and configure the RF802EW using a different Ethernet LAN IP address.
99
