Chapter 5 - RouteFinder Manager
Port Settings
The Modem Settings options are used to configure the communication between your modem or ISDN TA and your RouteFinder serial port. You must specify the baudrate, modem and modem string settings for your device.
1.To view or change the port settings, from the main Manager dialog box, click Port Settings. The Port Settings dialog box displays.
2.Complete the following:
Baudrate
Use the list to select the Remote Access DTE speed for your device.
The absolute maximum setting for a given port on the network device is 4 x the speed of your modem. If the baudrate is set too high, your network device may fail to establish a
If your modem does not appear in the list provided, the Standard Modem selection will work in most cases.
Important: If you are using an ISDN Terminal Adapter, refer to the Async to Sync PPP string in the User Manual provided with the device to determine the correct initialization, dialup, and hang up strings.
Note: Due to variations in ISP connections and phone line quality, this theoretical maximum speed is not attainable. You may need to set the baudrate at a lower speed.
42
