Operating
your DVD (VCR) with Remote Control
1
2
3
Press DVD button to set the remote to DVD mode.
•If you operate VCR, press VCR button to set the remote to VCR mode.
Press POWER button to turn on the DVD (VCR).
Point the remote control toward the DVD (VCR).
While holding down POWER button, enter
4 the code corresponding to your brand of DVD (VCR).
•If the code matches the DVD (VCR)'s code, the DVD (VCR) will be turned off.
•If there is more than one code listed for your DVD (VCR) in the table, enter one at a time to determine which code works.
If DVD (VCR) is turned on or off when you
5 press the power button of the remote controller, the setting is completed.
•You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE, STOP, SKIP, MENU and Numeric button (0~9).
•The remote control may not work on some brands of DVD (VCR)s. Also, some operations may not be possible depending on your brand of DVD (VCR).
•The remote control will work with Samsung DVDs (VCRs) by default.
44
