Samsung 320MP-3, 320MXN-3, 320MPN-3 RS232C OUT/IN RS232C Serial Port, LAN LAN Connection Terminal

Introduction

RJ 45 MDC (MDC PORT)

MDC(Multiple Display Control) Program Port

Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC Program must be installed on the PC.

Note

Go to Multi Control and select RJ45 MDC as the MDC Connection.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

Connect a serial cable (cross type) to [RS232C] on the product and RS232C on the PC. To use an MDC, the MDC Program must be installed on the PC.

Note

Go to Multi Control and select RS232C

MDC as the MDC Connection.

Applicable to the MXn-3, MPN-3 model only

RGB OUT

MagicInfo video output port

MAGICINFO OUT

This is the output terminal for the video, au- dio, and control signals of MagicInfo.

It can be used by connecting it to the [HDMI

IN 2 (MAGICINFO)] terminal using a DP to

HDMI cable.

LAN (LAN Connection Terminal)

Connects to a LAN cable to allow Internet or network access in MagicInfo mode.

USB (USB Connection Terminal)

Keyboard / Mouse, Mass Storage Device

Compatible.