Samsung 400DX Connecting the LCD Display, Using a Power cord with Earth, Connecting a Computer

Models: 460DX 400DX

1 90
Download 90 pages 11.02 Kb
Page 34
Image 34
Connecting the LCD Display

Connecting the LCD Display

Using a Power cord with EarthUsing a Power cord with Earth

In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.

 Connecting a Computer Note

AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD Display.

Manual background Connecting a Computer

1)Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Trun on the power switch.

2)There are 3 ways to connect the D-sub to your LCD Display. Choose one of the following:

2-1) Using the D-sub (Analog) connector on the video card.

Connect the D-sub to the 15-pin,RGB port on the back of your LCD Display and the 15 pin D- sub Port on the computer.

2-2) Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI(HDCP) port on the back of your LCD Display and the DVI port on the computer.

2-3)

Using the BNC (Analog) connector on the video card.

Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of your LCD Display and the 15 pin D-sub Port on the computer.

Page 34
Image 34
Samsung 400DX, 460DX specifications Connecting the LCD Display, Using a Power cord with Earth, Connecting a Computer