Samsung 400DX, 460DX specifications Wall Bracket Angle Adjustment

1.Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers.

2.Be careful when installing the product on the bracket as fingers can be caught in the holes.

3.Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation.

Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.

Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.

A. Monitor

B. Wall Bracket

C. Wall

Wall Bracket Angle Adjustment

Adjust the bracket angle to -2°before installing it on the wall.

1.Fix the product to the wall bracket.

2.Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.

3.You can adjust the bracket angle between -2°and 15 °.

Make sure to use the top center, and not the leftor the right side of the product to adjust the angle.