Audio Input 2 | RCA Jack Red(R) White(L), 0.5 Vrms |
PC Audio Input | 3.5 Ø Stereo Jack, 0.5 Vrms |
Frequency | RF: 80 Hz ~ 15 kHz (at |
Response | A/V: 80 Hz ~ 20 kHz (at |
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problelms.
• For example, the number of TFT LCD sub pixels contained in this product are 3,133,440.
Note
• Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
•This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a
PowerSaver (When used as a normal monitor)
State | Normal Operation | Power saving mode | Power off | |
EPA/ENERGY 2000 | ||||
|
|
| ||
Power Indicator | Green | Green, Blinking | Amber | |
Power Consumption | Less than | Less than 1 W | Less than 1 W | |
270 W | (Power button) | |||
|
This monitor is EPA ENERGY STAR ® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality.
As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency.
Preset Timing Modes
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and Adjusts the screen as follows.
| Horizontal | Vertical | Pixel Clock | Sync Polarity | |
Display Mode | Frequency | Frequency | |||
(MHz) | (H/V) | ||||
| (kHz) | (Hz) | |||
|
|
|