1)POWER S/W ON [ ] / OFF [O]

Switches the LCD Display On/Off.

2)POWER IN

The power cord plugs into the LCD Display and the wall plug.

3)REMOTE OUT/IN

You can use a wired remote control by connecting it to your monitor.

4)RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

5)DVI / PC / HDMI IN [PC/DVI/BNC AUDIO IN] (PC/DVI/BNC/HDMI Audio Connection Terminal (Input))

6)DVI / PC / HDMI IN [HDMI]

Connect the HDMI IN terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable.

7)DVI / PC / HDMI IN [RGB] (PC Video Connection Terminal)

Using a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)

8)DVI / PC / HDMI IN [DVI(HDCP)] (PC Video Connection Terminal)

Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)

9)COMPONENT AUDIO IN [L-AUDIO-R] (Component Audio Connection Terminal (Input))

10)BNC/COMPONENT OUT [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Output))

BNC (Analog PC) Connection: connecting the R, G, B, H, V ports

Component Connection: connecting the PR, Y, PB ports

11)BNC/COMPONENT IN [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Input))

Page 14
Image 14
Samsung 400DX Power S/W on / OFF O, RS232C OUT/IN RS232C Serial Port, DVI / PC / Hdmi in RGB PC Video Connection Terminal