Warning
When you use the DC power output jack, you have to check the standard output power of STB(SBB) and you should use the DC power within the standard output(Class 2
––For 5V SBB, SBB load current must not exceed 2.5A.
––For 12V SBB, SBB load current must not exceed 1.5A.
––The initial output is 5V.
––For 12V SBB, you have to change the output voltage to 12V in order to use the power.
Changing the Output Voltage (Only for EU C457 26" 32" 37" 40" model)
1.Press the POWER button. ✎✎ The TV is powered on.
2.Press the following remote control buttons in order. INFO → MENU → 0 → 1 → EXIT
✎The Hotel Option menu appears.✎
3. Press the ▲ or ▼ button to select DC Power Output. Press the ◄ or ► button to select 12V or 5V.
4. Remove the power cord then plug it back in again.
✎✎ The voltage change is applied when you turn the TV on again after changing the Interactive mode Option setting.
| Hotel Mode | ON | RJP Priority AV | 1 | Logo Download | ... |
|
| SI Vendor | Samsung | RJP Priority PC | 2 | Logo Display Time | ... |
|
| Power On Channel | 1 | RJP Priority HDMI | 3 | Power On Option | Last Option | |
| Channel Type | ATV | RJP AV Option | AV1 | Auto Source | OFF | |
| Power On Volume | 10 | RJP HDMI Option | HDMI1 | Energy Saving | Off | |
| Min Volume | 0 | Sub AMP Volume | 6 | Clone : TV to USB |
|
|
| Max Volume | 100 | Sub AMP Mode | 2 | Clone : USB to TV |
|
|
| Panel Button Lock | Unlock | Local Time | Manual | Pan Euro MHEG | OFF | |
| Power On Source | TV | Time Format | 12 Hour | Cloning Data Reset | OFF | |
| Picture Menu Lock | OFF | PMOLED Test | Failure | Welcome Message |
|
|
| Channel Editor |
| PMOLED Mormal Dim. | 3 | Edit Welcome Message |
|
|
| Music Mode AV | OFF | PMOLED Standby Dim. | 2 | DC Power Out | 5V |
|
| Music Mode PC | OFF | Audio Loop In | OFF | Channel Auto Store |
|
|
| Music Mode Comp | OFF | Menu Display | ON | Dynamic SI | OFF | |
| Music Mode Backlight | OFF | Hotel Logo | OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16 English
