¦¦ Hotel Logo
Hotel Logo is a function that shows picture image which represents hotel during power on procedure.
––Hotel Logo will be in hotel option menu in both Standalone and Interactive mode.
––Lower menus will be enabled when hotel Logo option is on.
––Hotel Logo will be displayed if there is logo image which is already stored in memory and hotel logo option is on during power on procedure.
––Hotel Logo will not be displayed when Hotel Logo option is off, even if the logo image exists.
| Hotel Mode | ON | RJP Priority AV | 1 | Logo Download | ... |
| SI Vendor | Samsung | RJP Priority PC | 2 | Logo Display Time | ... |
| Power On Channel | 1 | RJP Priority HDMI | 3 | Power On Option | Last Option |
| Channel Type | ATV | RJP AV Option | AV1 | Auto Source | OFF |
| Power On Volume | 10 | RJP HDMI Option | HDMI1 | Energy Saving | Off |
| Min Volume | 0 | Sub AMP Volume | 6 | Clone : TV to USB |
|
| Max Volume | 100 | Sub AMP Mode | 2 | Clone : USB to TV |
|
| Panel Button Lock | Unlock | Local Time | Manual | Pan Euro MHEG | OFF |
| Power On Source | TV | Time Format | 12 Hour | Cloning Data Reset | OFF |
| Picture Menu Lock | OFF | PMOLED Test | Failure | Welcome Message |
|
| Channel Editor |
| PMOLED Mormal Dim. | 3 | Edit Welcome Message |
|
| Music Mode AV | OFF | PMOLED Standby Dim. | 2 | DC Power Out | 5V |
| Music Mode PC | OFF | Audio Loop In | OFF | Channel Auto Store |
|
| Music Mode Comp | OFF | Menu Display | ON | Dynamic SI | OFF |
| Music Mode Backlight | OFF | Hotel Logo | OFF |
|
|
|
|
|
|
|
|
|
yy Hotel Logo
yy Hotel Logo DL
––This option is to download logo image to memory.
––Download the Logo File from PC to USB.
xx Logo File Format
––Only bmp format is supported and the File name should be "samsung.bmp".
––File size must be under 256Kbytes.
––Maximum resolution is 960 x 540.
––Connect the USB to TV and press Enter key.
––“Wait” message will be displayed during copying image to TV.
––“Completed” message will be displayed when the copy operation was finished successfully.
––“Failed” message will be displayed when the copy operation was finished unsuccessfully.
––“No USB” message will be displayed when any USB is not connected.
yy Logo Display Time
––This option is to decide Logo display time.
––3 sec / 5 sec / 7sec
English 27
