Connecting the RJP (Remote Jack Pack)

Output of any external source connected to RJP on hotel desk.

4 HDMI cable

USB HDMI S-VIDEO RCA AUDIO/PC

RS/232

ANT IN

TV Rear Panel

5Vdc/2.5A

(12Vdc/1.5A)

5TV Side Panel

HDMIIN3

RJP Rear

 

1 D-sub / PC Audio cable

 

 

 

or

 

2 Video / Audio Cable

 

 

 

3 Audio Cable

 

 

1.

Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.

 

 

2.

Connect the AV IN [VIDEO]/[L-AUDIO-R]port of the TV to the S-VIDEO port of the RJP.

 

 

3.

Connect the AV IN [VIDEO] port of the TV to the S-VIDEO port of the RJP.

 

 

4. Connect the HDMI port of the TV and the HDMI port of the RJP.

 

 

5.

Connect the RJP port of the TV and the RS/232 port of the RJP.

 

 

 

The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660

(HD Plus).

yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User.

You can select HDMI 1, 2, 3 and AV 1, 2 for connecting RJP.

When the TV is on, connect the TV and the RJP within 10 seconds.

yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to Acknowledge that the rest has been performed.

yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.

yy After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and the RJP.

20 English

LC452_453_457-hotel.indd 20

2010-04-12 오후 8:37:31

Page 20
Image 20
Samsung 457, 453, 452 installation manual Connecting the RJP Remote Jack Pack, TV Side Panel, HD Plus