Samsung 400DXN-2, 460DX-2, 460DXn-2, 400DX-2 Power S/W on / OFF O, RS232C OUT/IN RS232C Serial Port

Introduction

Note

Applicable to the DX-2 model only.

Applicable to the DXN-2 model only.

POWER S/W ON [ │ ] / OFF [O]

Switches the LCD Display On/Off.

POWER

The power cord plugs into the LCD Display and the wall outlet.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

RGB/COMPONENT IN (PC/COMPO-

NENT Connection Terminal (Input))

•Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)

•Connect the RGB/COMPONENT IN port on the monitor to the COMPONENT port on the external device using the D-SUB to COMPONENT cable.

•Connect the RGB/COMPONENT IN port on the monitor to the BNC port on the PC using the D-SUB to BNC cable.