Samsung 460 Resetting the Picture Settings to the Factory Defaults, Changing the Format

4Press the ▲ or ▼ button to select Picture, Option then press the ENTER button.

Press the ▲ or ▼ button to select 3D Effect then press the ENTER button.

5Press the ▲ or ▼ button to select Mode, then press the ENTER button. Press the ▲ or ▼ button to select Off, Mode1 or Mode2 then press the ENTER button.

•Off : Turns the 3D Effect function off.

•Mode1 : Mode 1 operates with right sync first.

•Mode2 : Mode 2 operates with left sync first.

➢You should choose Off to end 3D Effect completely.

➢If the 3D effect is not working properly, it means the Mode and 3D glasses may not be syncing properly. To put them in sync, switch to the other mode.

Changing the Format

Select the optimal input format to match your graphic cards or 3D Software. See the descriptions for Steps 1 to 4 above.

5Press the ▲ or ▼ button to select Format, then press the ENTER button.

6Press the ▲ or ▼ button to select Checkerboard, Horizontal or Vertical then press the ENTER button.

Checkerboard	If the output format of your graphic card or 3D
	software is Checkerboard, select this input
	format.
Horizontal	If the output format of your graphic card or 3D
	software is Horizontal interleaved, select this
	input format.
Vertical	If the output format of your graphic card or 3D
	software is Vertical interleaved, select this input
	format.

Easy Setting

1Press the TOOLS button on the remote control.

2 Press the ▲ or ▼ button to select 3D Effect.

3Press the ENTER button to start the 3D Effect.

T V Picture

▲More

	Detailed Settings		►
	Picture Options		►
	Reset	: OK	►
	Move	Enter	Return
T V	Picture Options

▲More

	Screen Burn Protection				►
	3D Effect				►
	Move		Enter		Return
T V		3D Effect
	Mode	:		Off
				Mode 1
	Format	:
				Mode 2

Move	Enter		Return
T V	3D Effect
Mode	: Mode 1
Format	:
		Checkerboard
		Horizontal
		Vertical
Move	Enter		Return

	Tools
3D Mode	◄	Off	►
Anynet+ (HDMI-CEC)
Picture Mode	:	Dynamic
Sound Mode	:	Standard
Sleep Timer	:	Off
SRS TS XT	:	Off
Energy Saving	:	Off
Move	Adjust		Exit

Resetting the Picture Settings to the Factory Defaults

1To select the desired picture mode, follow the Activating Picture Options instructions numbers 1 and 2. (see page 26)

2Press the ENTER button to select Picture.

Press the ▲ or ▼ button to select Reset, then press the ENTER button.

Press the ◄ or ► button to select OK or Cancel then press the ENTER button. Press the EXIT button to exit.

➢ Each mode can be reset.

T V Picture

▲More Detailed Settings Picture Options

Reset	: OK
		Cancel
Move	Enter		Return

English - 33