Multi Control
Assigns an individual ID to the SET.
MENU ENTER Multi Control ENTER
•ID Setup
Assigns distinctive IDs to the SET.
•ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
MagicInfo
Available Modes
• PC / BNC / DVI
• AV
• HDMI
• MagicInfo
• TV
• Component
Note
•The operating system for this set only supports English so the other languages might be corrupted
on the screen.
•For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using
a separate USB keyboard.
• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up
external devices only if the LCD Display turns on.
•Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program
(MagicInfo) may stop. If you do unplug the cable, restart the system.
•Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program
(MagicInfo) may stop.
• To access other sources, press the SOURCE button in MagicInfo.
Adjusting the LCD Display